Description
24mm total length
The Exclusive Beadalon EZ-Crimp Ends and Findings are designed to be used with the Beadalon EZ-Crimp Pliers. Simply navigate the EZ-Crimp End into the jaw of the EZ-Crimp Pliers with the smooth part of the end in the curved tip of the jaw. Next, squeeze completely and repeat if necessary on the full length of the EZ-Crimp End. The connection with the wire is now complete.
View AllClose
Step 1: Pull the wire through the EZ-Crimp finding.
Step 2: Grasp the EZ-Crimp finding with the EZ-Crimp pliers, pull the wire to snug it up to the design, and crimp down firmly the entire length of the finding.
Step 3: Snip the wire as close to the inside of the EZ-Crimp as possible using a flush cutter.
Step 2: Grasp the EZ-Crimp finding with the EZ-Crimp pliers, pull the wire to snug it up to the design, and crimp down firmly the entire length of the finding.
Step 3: Snip the wire as close to the inside of the EZ-Crimp as possible using a flush cutter.
